Abstract & Details
Description
Award ID: 2041676
The broader impact/commercial potential of this I-Corps project provides real-time measurements to optimize yield and reduce waste in novel roll-to-roll (R2R) manufacturing processes. The proposed high-speed technology can perform the critical non-contact, real-time measurements without interfering with high-speed R2R fabrication processes. Commonly used analytical tools use statistical analysis procedures; none of them can be implemented during real-time R2R fabrication systems due to their large-size and vacuum conditions. The proposed technology closes the gap between new fabrication processes and systems that measure in real time. This I-Corps project focuses on the commercialization of metrology technology for novel fabrication processes used in nano-technology products (e.g. nano-imprint lithography, roll-to-roll, and wafer-scale). The proposed in-line optical angular scatterometer provides real-time metrology without interfering with fabrication processes. Optical Angular Scatterometry offers enough resolution to characterize structures down to approximately 20 nm and 24 nm (pitch size) for pattern metallic and photoresist nanostructures. Projections of sensitivity show enough resolution and sensitivity for dimensions down to approximately 10 nm. The proposed scatterometer system has been demonstrated on a moving substrate at a speed of 50 cm/s, well above currently projected roll-to-roll manufacturing speeds. Various 1D, 2D, and 3D patterns have been studied in good agreement with both static off-line scatterometers and SEM measurements. This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
NSF Program Director: Ruth Shuman
The broader impact/commercial potential of this I-Corps project provides real-time measurements to optimize yield and reduce waste in novel roll-to-roll (R2R) manufacturing processes. The proposed high-speed technology can perform the critical non-contact, real-time measurements without interfering with high-speed R2R fabrication processes. Commonly used analytical tools use statistical analysis procedures; none of them can be implemented during real-time R2R fabrication systems due to their large-size and vacuum conditions. The proposed technology closes the gap between new fabrication processes and systems that measure in real time. This I-Corps project focuses on the commercialization of metrology technology for novel fabrication processes used in nano-technology products (e.g. nano-imprint lithography, roll-to-roll, and wafer-scale). The proposed in-line optical angular scatterometer provides real-time metrology without interfering with fabrication processes. Optical Angular Scatterometry offers enough resolution to characterize structures down to approximately 20 nm and 24 nm (pitch size) for pattern metallic and photoresist nanostructures. Projections of sensitivity show enough resolution and sensitivity for dimensions down to approximately 10 nm. The proposed scatterometer system has been demonstrated on a moving substrate at a speed of 50 cm/s, well above currently projected roll-to-roll manufacturing speeds. Various 1D, 2D, and 3D patterns have been studied in good agreement with both static off-line scatterometers and SEM measurements. This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
NSF Program Director: Ruth Shuman
| Status | Closed |
|---|---|
| Effective start/end date | 01/01/21 → 10/31/21 |
Funding
- I-Corps Teams: $50,000.00
Active Fiscal Year
- FY2022
Start Fiscal Year
- FY2021
TIP Programs
- I-Corps Teams
Key Technology Areas
- Robotics and Advanced Manufacturing
- (confidence score: 96%)
Technology Foci
- Advanced Manufacturing (excluding biomanufacturing and semiconductor manufacturing)
- (confidence score: 99%)
Congressional District at Award
- District n. 01 of New Mexico
Current Congressional District
- District n. 01 of New Mexico
United States
- New Mexico
Core Based Statistical Area (CBSA)
- Albuquerque, NM
County
- County: Bernalillo, NM
EPSCoR Jurisdiction
- Yes
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint. Learn more about Elsevier's Fingerprint Engine here: https://beta.elsevier.com/products/elsevier-fingerprint-engine