Abstract & Details
Description
Award ID: 2026026
The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase I project is the ability to improve fuel efficiency and reduce carbon dioxide emissions in transportation. Lightweight metals, such as aluminum, magnesium, and titanium, are particularly desirable for alloys used in automotive and aerospace components, as they could reduce the weight of components by 30%-70%. However, it is difficult to coat these materials because the high temperatures required for the coating processes weaken the alloys. This project will develop a new process to conduct the coating process at lower temperatures, offering high load capacity and enhanced wear and corrosion resistance. This Small Business Innovation Research (SBIR) Phase I project utilizes a high-pressure gas nitriding medium to enable surface reactions for coating lightweight metals, allowing for lower treatment temperatures at or below 450C. Traditional engineered surfaces are often incompatible with lightweight metals because of cracking that destroys the functional properties. Furthermore, coating these alloys presents challenges because they distort at relatively low temperatures. This novel approach of nitriding at high pressures provides a chemically converted surface layer that prepares the surface for a secondary surface treatment, such as diamond-like carbon coatings or metal oxides, that typically fail on lightweight metals. The multi-layer approach also provides enhanced corrosion resistance by disrupting diffusion pathways of corrosive media. Combining a hard and stiff sublayer with a softer top layer with lower elastic modulus provides a multi-layer surface for lightweight metals. This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
NSF Program Director: Rajesh Mehta
The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase I project is the ability to improve fuel efficiency and reduce carbon dioxide emissions in transportation. Lightweight metals, such as aluminum, magnesium, and titanium, are particularly desirable for alloys used in automotive and aerospace components, as they could reduce the weight of components by 30%-70%. However, it is difficult to coat these materials because the high temperatures required for the coating processes weaken the alloys. This project will develop a new process to conduct the coating process at lower temperatures, offering high load capacity and enhanced wear and corrosion resistance. This Small Business Innovation Research (SBIR) Phase I project utilizes a high-pressure gas nitriding medium to enable surface reactions for coating lightweight metals, allowing for lower treatment temperatures at or below 450C. Traditional engineered surfaces are often incompatible with lightweight metals because of cracking that destroys the functional properties. Furthermore, coating these alloys presents challenges because they distort at relatively low temperatures. This novel approach of nitriding at high pressures provides a chemically converted surface layer that prepares the surface for a secondary surface treatment, such as diamond-like carbon coatings or metal oxides, that typically fail on lightweight metals. The multi-layer approach also provides enhanced corrosion resistance by disrupting diffusion pathways of corrosive media. Combining a hard and stiff sublayer with a softer top layer with lower elastic modulus provides a multi-layer surface for lightweight metals. This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.
NSF Program Director: Rajesh Mehta
| Status | Closed |
|---|---|
| Effective start/end date | 08/01/20 → 03/31/22 |
Lead and Sub-Awardee Organization(s)
Funding
- SBIR Phase I: $256,000.00
Active Fiscal Year
- FY2022
Start Fiscal Year
- FY2020
TIP Programs
- SBIR Phase I
Small Business
- Yes
Key Technology Areas
- Advanced Materials
- (confidence score: 100%)
- Robotics and Advanced Manufacturing
- (confidence score: 97%)
Technology Foci
- Advanced Manufacturing (excluding biomanufacturing and semiconductor manufacturing)
- (confidence score: 98%)
- Related manufacturing technologies
- (confidence score: 96%)
Congressional District at Award
- District n. 13 of Ohio
Current Congressional District
- District n. 13 of Ohio
United States
- Ohio
Core Based Statistical Area (CBSA)
- Akron, OH
County
- County: Summit, OH
Fingerprint
Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint. Learn more about Elsevier's Fingerprint Engine here: https://beta.elsevier.com/products/elsevier-fingerprint-engine